Tratamento cirúrgico da osteomielite dos maxilares: relato de caso / Surgical treatment of osteomyelitis of the jaws: Case report / Tratamento quirúrgico de la osteomielitis de los maxilares: reporte de um caso

A Osteomielite dos Maxilares (OM) é uma inflamação óssea, de origem na maioria infecciosa, podendo atingir a porção medular e cortical dos ossos maxilares. Apresenta-se em maior extensão na mandíbula, devido ao pobre suprimento sanguíneo que essa possui, sendo mais prevalente em homens entre a faixa etária de 40 a 60 anos. Sua etiologia está relacionada principalmente às infecções odontogênicas, infecções secundárias e corpos estranhos ocasionais, como os implantes dentários. Tem-se por objetivo apresentar um relato de caso clínico sobre OM na região posterior da mandíbula, bem como sua associação a uma insatisfatória implantação dentária onde houve desenvolvimento de lesão peri-implantar. Paciente do gênero feminino, 53 anos, melanoderma, apresentou dor crônica, abaulamento ósseo sem outros sinais significativos na região de molares inferiores no lado direito, radiograficamente visualizava-se imagem mista sendo sugestiva de sequestro ósseo. Na história pregressa relatou ter realizado explantação na referida região após ser diagnosticada com peri implantite. Ao final do estudo concluiu-se que a afecção teve como causa a infecção bacteriana proveniente de contaminação durante a inserção de implante dentário. Optou-se por remoção cirúrgica do osso necrótico e inflamado... (AU)

Osteomyelitis of the Jaws (OM) is a bone inflammation, of mostly infectious origin, which can affect the medullary and cortical portion of the maxillary bones. It presents itself to a greater extent in the mandible, due to the poor blood supply that it has, being more prevalent in men between the age group of 40 to 60 years. Its etiology is mainly related to odontogenic infections, secondary infections and occasional foreign bodies, such as dental implants. The objective is to present a clinical case report on OM in the posterior region of the mandible, as well as its association with an unsatisfactory dental implantation, where there was development of a peri-implant lesion. Female patient, 53 years old, melanoderma, presented chronic pain, bone bulging without other significant signs in the region of lower molars on the right side, radiographically a mixed image was visualized, suggesting bone sequestration. In her previous history, she reported having performed explantation in that region after being diagnosed with peri-implantitis. At the end of the study, it was concluded that the disease was caused by bacterial infection from contamination during dental implant insertion. We opted for surgical removal of the necrotic and inflamed bone... (AU)

La osteomielitis de los maxilares (OM) es una inflamación de los huesos, en su mayoría de origen infeccioso, que puede afectar la porción medular y cortical de los huesos maxilares. Se presenta en mayor medida en la mandíbula, debido a la escasa irrigación sanguínea que tiene, siendo más prevalente en hombres entre el grupo de edad de 40 a 60 años. Su etiología se relaciona principalmente con infecciones odontogénicas, infecciones secundarias y cuerpos extraños ocasionales, como los implantes dentales. El objetivo es presentar un reporte de caso de OM en la región posterior de la mandíbula, así como su asociación con una implantación dentaria insatisfactoria a partir de la cual desarrollamos una lesión periimplantaria. Paciente femenina, 53 años, melanodermia, presenta dolor crónico, tumefacción ósea con otros signos significativos en región molar inferior del lado derecho, radiográficamente se visualiza imagen mixta sugestiva de pérdida ósea. En su historia previa menciona haber realizado una explantación en esa región tras ser diagnosticada de periimplantitis. Al final del estudio, se concluyó que la enfermedad fue causada por una infección bacteriana provocada por la contaminación durante la inserción del implante dental. Se optó por la extirpación quirúrgica de la piel necrótica e inflamada... (AU)

Tratamento cirúrgico do mixoma odontogênico sem ressecção maxilar: relato de caso / Surgical Treatment od Odontogenic Mixoma Without Maxillary Resection: Case Report / Tratamiento Quirúrgico del Mixoma Odontogénico Sin Resección Maxilar: Informe de Caso

Mixoma Odontogênico é um tumor de origem mesenquimal raro, de desenvolvimento lento e agressivo que acomete indivíduos entre os 10 e 40 anos de idade e principalmente, do gênero feminino. Este estudo teve como principal objetivo descrever um caso clinico de tratamento cirúrgico do mixoma odontogênico sem ressecção maxilar em uma paciente do gênero feminino que compareceu ao Ambulatório de Patologia Oral e Maxilo Facial, da Faculdade de Odontologia da UNIRG, na cidade de Gurupi-TO - Brasil. A paciente foi submetida ao tratamento cirúrgico conservador, através da curetagem e enucleação total do tumor. A proservação foi realizada em períodos de 12 meses, 24 meses e 48 meses aonde pode-se observar a sequencial e completam reparação óssea, inclusive a permanência dos dentes envolvidos que foram submetidos a tratamento endodôntico com total remodelação da lâmina dura e do ligamento periodontal... (AU)

Odontogenic Myxoma (OM) is a rare tumor of mesenchymal origin, of slow and aggressive development that affects individuals between 10 and 40 years of age and mainly female. This study aimed to describe a clinical case of surgical treatment of odontogenic myxoma with out maxillary resection in a female patient who attended the Outpa tient Clinic of Oral Pathology and Facial Maxillo, of UNIRG Dental School, in the city of Gurupi-TO - Brazil. The patient underwent con servative surgical treatment through curettage and total enucleation of the tumor. Proservation was carried out in periods of 12 months, 24 months and 48 months where it was possible to observe the sequential and complete bone repair including the permanence of the involved teeth that underwent endodontic treatment with total remodeling of hard blade and of the periodontal ligament... (AU)

El mixoma odontogénico es un tumor de origen mesenquimal poco frecuente, de desarrollo lento y agresivo que afecta a individuos entre 10 y 40 años de edad y principalmente mujeres. El objetivo principal de este estudio fue describir un caso clínico de tratamiento quirúrgico de mixoma odontogénico sin resección maxilar en una paciente femenina que asistió a la Clínica Ambulatoria de Patología Oral y Maxilo Facial, de la Facultad de Odontología de UNIRG, en la ciudad de Gurupi-TO - Brasil. El paciente se sometió a tratamiento quirúrgico conservador mediante legrado y enucleación tumoral total. La conservación se realizó en periodos de 12 meses, 24 meses y 48 meses donde es posible observar reparación ósea secuencial y completa, incluyendo la permanencia de los dientes implicados que fueron sometidos a tratamiento endodóntico con remodelación total de la durancia y ligamento periodontal... (AU)

Optimization of the design of extremely thin absorber solar cells based on electrodeposited ZnO nanowires.

The properties of the components of ZnO/CdSe/CuSCN extremely thin absorber (ETA) solar cells based on electrodeposited ZnO nanowires (NWs) were investigated. The goal was to study the influence of their morphology on the characteristics of the solar cells. To increase the energy conversion efficiency of the solar cell, it was generally proposed to increase the roughness factor of the ZnO NW arrays (i.e. to increase the NW length) with the purpose of decreasing the absorber thickness, improving the light scattering, and consequently the light absorption in the ZnO/CdSe NW arrays. However, this strategy increased the recombination centers, which affected the efficiency of the solar cell. We developed another strategy that acts on the optical configuration of the solar cells by increasing the diameter of the ZnO NW (from 100 to 330 nm) while maintaining a low roughness factor. We observed that the scattering of the ZnO NW arrays occurred over a large wavelength range and extended closer to the CdSe absorber bandgap, and this led to an enhancement in the effective absorption of the ZnO/CdSe NW arrays and an increase in the solar cell characteristics. We found that the thicknesses of CuSCN above the ZnO/CdSe NW tips and the CdSe coating layer were optimized at 1.5 µm and 30 nm, respectively. Optimized ZnO/CdSe/CuSCN solar cells exhibiting 3.2% solar energy conversion efficiency were obtained by using 230 nm diameter ZnO NWs.

Structural and optical characterization of electrodeposited CdSe in mesoporous anatase TiO2 for regenerative quantum-dot-sensitized solar cells.

We investigated CdSe-sensitized TiO(2) solar cells by means of electrodeposition under galvanostatic control. The electrodeposition of CdSe within the mesoporous film of TiO(2) gives rise to a uniform, thickness controlled, conformal layer of nanostructured CdSe particles intimately wrapping the anatase TiO(2) nanoparticles. This technique has the advantage of providing not only a fast method for sensitization ( < 5 min) but also being easily scalable to the sensitization of large-area panels. XRD together with SAED analysis highlight that the deposit of CdSe is exclusively constituted of the hexagonal polymorph. In addition, hierarchical growth has also been shown, starting from the formation of a TiO(2)-CdSe core-shell structure followed by the growth of an assembly of CdSe nanoparticles resembling cauliflowers. This assembly exhibits at its core a mosaic texture with crystallites of about 3 nm in size, in contrast to a shell composed of well-crystallized single crystals between 5 and 10 nm in size. Preliminary results on the photovoltaic performance of such a nanostructured composite of TiO(2) and CdSe show 0.8% power conversion efficiency under A.M.1.5 G conditions-100 mW cm(-2) in association with a new regenerative redox couple based on cobalt(+III/+II) polypyridil complex (V(oc ) = 485 mV, J(sc ) = 4.26 mA cm (-2), ff=0.37).

Electrodeposition of gold thin films with controlled morphologies and their applications in electrocatalysis and SERS.

Here, an easy and effective electrochemical route towards the synthesis of gold thin films with well-controlled roughness, morphology and crystallographic orientation is reported. To control these different factors, the applied potential during deposition played a major role. A tentative nucleation and growth mechanism is demonstrated by means of electrochemical characterizations and a formation mechanism is proposed. Interestingly, the differences in geometry and orientation of the different gold deposits have shown a clear correlation with the electrocatalytical activity in the case of oxygen sensing. In addition, not only the electrocatalytical activity but also the surface-enhanced Raman scattering of the gold deposits have been found to depend both on the roughness and on the size of the surface nanostructures, allowing a fine tuning by controlling these two parameters during deposition.

Simple synthetic route for SERS-active gold nanoparticles substrate with controlled shape and organization.

We report a simple synthetic route based on electroless deposition (galvanic displacement) and natural lithography to simultaneously control the shape and organization of Au nanoparticles (NPs). We show for the first time the formation of organized extended domains of Au nanoflowers and nanocrowns with single crystalline tips. The dimension and morphology of the desired nanostructures (NSs) can be tuned easily by controlling the deposition conditions at room temperature using saccharin as an organic additive. The exact role of saccharin on the crystal growth process of Au NPs is also discussed. A systematic surface enhancement Raman spectroscopy (SERS) study of large, ordered areas of organized gold nanoflowers using p-mercaptoaniline (pMA) as the probe molecule shows massive and reproducible enhancements of the Raman signal. By comparing the relative enhancement of the different vibrational modes as a function of the morphology, the specific charge-transfer (chemical effect) SERS mechanism can be distinguished from the general electromagnetic field enhancement (physical effect). A wide range of applications can be envisaged for these SERS substrates.